24 Core Single Mode 9/125 G652D ADSS Fiber Cable For 100m Span
Structure Design:
Main Feature:
1. Suitable for use on distribution and high voltage transmission lines with mini spans or self supporting installation for telecommunication；
2. Track -Resistant outer jacket available for the high voltage (≥35KV); HDPE outer jacket available for the high voltage (≤35KV)；
3. Excellent AT performance. The maximum inductive at the operating point of AT jacket can reach 25kV.
4. Gel-Filled buffer tubes are S-Z stranded;
5. Can be installed without shutting off the power.
6. Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops.
7. Good performance of tensile strength and temperature.
8. The design life span is over 30 years.
Standards:
GL Technology's ADSS Fiber Cable complies with IEC 60794-4, IEC 60793, TIA/EIA 598 A standards.
Advantages of GL ADSS Optical Fiber Cable:
1.Good aramid yarn have excellent tensile performance;
2.Fast delivery, 200km ADSS cable regular production time about 10 days;
3.Can using glass yarn instead of aramid to anti rodent.
Colors -12 Chromatography：
Optical Fiber Characteristics:
|
Optical Characteristics |
|||||||||||||||||||
| G.652.D | G.655 | 50/125um | 62.5/125um | ||||||||||||||||
| Attenuation | @850nm | - | - | ≤3.0 dB/km | ≤3.0 dB/km | ||||||||||||||
| @1300nm | - | - | ≤1.0 dB/km | ≤1.0 dB/km | |||||||||||||||
| @1310nm | ≤0.36 dB/km | ≤0.40 dB/km | - | - | |||||||||||||||
| @1550nm | ≤0.22 dB/km | ≤0.23 dB/km | - | - | |||||||||||||||
| Bandwidth | @850nm | - | - | ≥500 MHz · km | ≥200 MHz · km | ||||||||||||||
| @1300nm | - | - | ≥1000 MHz · km | ≥600 MHz · km | |||||||||||||||
| Polarization mode | Individual fiber | ≤0.20 ps/√km | ≤0.20 ps/√km | - | - | ||||||||||||||
| Design link value (M=20,Q=0.01%) | ≤0.10 ps/√km | ≤0.10 ps/√km | |||||||||||||||||
Typical Technical Parameter of 24 core ADSS Cable:
| Part code | ADSS-SJ-100-24F | |
| Number of Fibers | Unit | 6core |
| Number of fiber in tube | Nos | 12 |
| Number of loose tube | Nos | 2 |
| Number of dummy filler | Nos | 4 |
| Central strength member | Material | FRP |
| Loose tube | Material | PBT |
| peripheral strength member | Material | Aramid yarn |
| Water block | Material | Water swellable tape and water block yarn |
| Outer sheath | Material | HDPE |
| Cable nominal Diameter | MM ±0.2 | 9.0~10.5 |
| Cable nominal weight | Kg/Km ±5 | 110 |
| Max. tension Load | N | 2500 |
| Span | 100m span | |
| Max. crush resistance | N | 2000 (Short term) / 1000 (Long term) |
| Min. bending radius | At full load 20 x Cable OD (including poles) At no load 15 x Cable OD | |
| Temperature range | Installation -0 -> +50 Operation -10 -> +70 | |
Remarks:
Detail requirements need to be sent to us for cable design and price calculation. Below requirements are a must:
A, Power transmission line voltage level
B, fiber count
C, Span or tensile strength
D, weather conditions
How to Ensure the Quality and Performance of Your Fiber Optic Cable?
We control the products quality from the raw material to the finish produts All the raw material should be tested to match the Rohs standard when they arrived at our manufacture.We control the quality during the producing process by advanced technology and equipments. We test the finished products according to the test standard. Approved by various professional optical and communication product institution , GL also conduct various in-house testing in its own Laboratory and Test Center. We also conduct test with special arrangement with the Chinese Government Ministry of Quality Supervision & Inspection Center of Optical Communication Products(QSICO).
Quality Control - Test Equipment and Standard:
Feedback: In order to meet the world’s highest quality standards, we continuously monitor feedback from our customers. For comments and suggestions, please contact us, Email: inquiry@gl-fibercable.com.
24 Core Single Mode 9/125 G652D ADSS Fiber Cable For 100m Span Related Video:
